Ercolina HB60 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 32

Ercolina HB60 Скачать руководство пользователя страница 9

-9-

05/2021

HB60

1.5. Personal protective equipment (PPE)

Always operate with personal protective equipment (PPE). Personnel in charge of installation,

maintenance or operation machine must not wear clothes with loose sleeves, laces, belts, bracelets,

long hair or other items that can be hazardous.

Recommended protective equipment to be worn.

1.6. Recipients of this document

This documentation is specific to HB60 model and intended for all machine installers and users

1.7. Storing these Instructions

All instructions regarding HB60 machine must be stored with machine and always be accessible.

Compulsory action:

in the related situations, wear the personal protective

equipment indicated in the table below.

Safety shoes

Use: always

Protective clothing

Use: always

Work gloves

Use: always

Safety goggles

Use: always

Helmet

Use: in the presence of suspended loads

Prohibition:

do not wear unsuitable clothing which, for example, may get

stuck in moving parts and result in dangerous situations.

«
...
7
8
9
10
11
...
»

Содержание HB60

































Отзывы:

Нет отзывов