A
12 x M6 35mm bolts
B
1 x allen key
Fittings and parts checklist
Step by step assembly instructions
1.
Lay the top of the desk on the floor. See diagram below.
Pull the drawer out a little so you can see
the bolt holes.
2.
Use the allen key provided to screw 3 of the bolts into each of the legs at both ends FINGER
TIGHT ONLY. When all 12 are in place tighten fully. Push the drawer back in. Turn the desk
upright.
PLEASE REFER TO THE ERCOL CARE CARD ENCLOSED WITH YOUR FURNITURE.
Er
col Furniture Ltd, Summerleys Road, Princes Risborough, Bucks. HP27 9PX
www.ercol.com
Drawer
