Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Installation shall be carried out exactly according to the manufacturers instructions, otherwise a safety risk can
occur if incorrectly installed. Cabinets and shelving over 600mm high can be unstable and should be supported
until fixed to the wall.
WARNING: In order to prevent overturning this product must be used with the wall attachment device provided.
Necessary Tools
This item is heavy
Slacken the two screws that hold each of the angled
fixing plates and slide the plate back to touch the wall,
then re tighten the two screws.
Mark the wall with a pencil through the hole in the
fixing plate
Move the unit away from the wall. Check for pipes and
electrical cables before drilling into the wall.
Drill the wall for a fixing appropriate to your wall
construction.
Place unit in its final position and make sure it is still
level. Fix cabinet to the wall by screwing through the
metal plate where applicable.
Wall fixing instructions
If you have the cabinet with drawers you
will first need to remove the top drawer.
To access the fixing point on the right.
For the fixing point on the left
and for the cabinet without
drawers, the fixing points can
be accessed by just opening
the doors
