A
16mm Screws x 2
G Brackets x 1
B Wedges x 2
H Strap x 1
Fittings and parts checklist
Wall fixing
- if in doubt seek professional advice
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily pull
away from the core
structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice
1. Screw one of the brackets on to the back of the display cabinet in the middle near to the top, using the
short screws provided fig.1. Position the bookcase against the wall where you want it to go, place the
second bracket onto the wall above the one fixed to the display cabinet and mark where the holes come
on the wall. fig.2 Move the Display cabinet away from the wall.
2. Attach the wall bracket
using screws suitable for your type of wall
, see
Wall fixings
above.
3. Place the Display cabinet back against the wall so the two brackets match up and tie them together with
the plastic strap provided Fig 3. The plates need not match exactly, but the plastic tie must go through
each plate. Close the strap, but do not over tighten it. See diagrams below.