Erbe 20190-117, Примечания к использованию

Страница: 13 / 146

13
IMPORTANT!
Please read all information carefully.
These instructions for use do not replace the user manual of the
electrosurgical unit used! Read the user manual of the electro-
surgical unit and ask Erbe or your distributor in case of doubt!
1
Intended use
The electrode handle is intended for monopolar cutting and co-
agulation.
2
Normal use
The electrode handle is to be used with 2.4 mm electrosurgical
electrodes.
Erbe recommends the use of Erbe HF electrodes. If the handle is
operated with HF electrodes from another manufacturer, please
observe the following: The joint from handle to HF electrodes of
other manufacturers is not standardized. The HF electrode of an-
other manufacture, although it may appear to fit the Erbe han-
dle, may have different dimensions and tolerances, a different
type of insulation, etc. Such differences hold risks for patient and
staff. Erbe Elektromedizin is glad to provide more information as
required.
The product is intended for single use.
3
Maximum electrical capacity
The maximum electrical capacity of these products is:
• 4300 V
p
OBJ_DOKU-193550-006.fm Seite 13 Montag, 14. September 2020 3:14 15