Erbauer ERI616HTL, Оригинальное руководство пользователя

Страница: 19 / 28

18V MULTI TOOL ERI616HTL
Fig. 1-1
Fig. 1-3
Fig. 1-2
Fig. 2-1
Fig. 2-2
Fig. 2-3
Fig. 3
Fig. 4
Fig. 5
C) HOW TO CHARGE YOUR BATTERY PACK
(See Fig. 1-3)
CHARGING PROCEDURE
1) Plug the charger into an appropriate outlet. The
light will be green.
2) Slide the battery pack into the charger, the light
will turn to red to indicate the charging process
has started.
3) When charging is completed, the light will turn
to green. The pack is now fully charged, unplug
the charger and remove the battery pack.
Warning: When battery charge runs out
after continuously use or exposure to
direct sunlight or heat, allow time for the tool
to cool down before re-charging to achieve the
full charge.
CHARGING INDICATOR
This charger is designed to detect some problems
that can arise with battery packs. Indicator lights
indicate problems (see table below). If this occurs,
insert a new battery pack to determine if the
charger is OK. If the new battery charges correctly,
then the original pack is defective and should be
returned to a service center or recycling service
center. If the new battery pack displays the same
problem as the original Battery Pack, have the
charger tested at an authorized service center.
Light ON/OFF flash Status
Red on Charging
Red flash
Defective
Battery
Green on
Fully Charged
Green flash
Hot/Cold Delay