Erbauer ERI604IPD, Руководство пользователя, Страница: 17 / 24

18V IMPACT DRIVER ERI604IPD
2. INSERT OR REMOVING A BIT HOLDER,
SOCKET OR SCREWDRIVER BIT (SEE FIG .2)
Pull the collet locking sleeve forward. Fully insert
the desired bit into the chuck and release the collet
locking sleeve.
3. FORWARD, REVERSE ROTATION AND LOCK
CONTROL (SEE FIG .3&4)
Your tool is equipped with a forward, reverse rotation
and lock control located above the on/off switch. It
was designed for changing rotation of the chuck and
for locking the on/off switch in the center position to
help prevent accidental start and accidental battery
discharge.
For forward rotation, (with chuck pointed away
from you) move the lever to the far left. For reverse
rotation move the lever to the far right. To activate
switch lock move the lever to the center off position.
CAUTION: Do not change direction
of rotation until the tool comes to a
complete stop. Shifting during rotation of the
chuck can cause damage to the tool.
4. USING THE LED LIGHT
The LED light allows you to keep a clear view under
less illuminated circumstances. To turn on the light
simply press the on/off switch. When you release the
on/off switch, the light will be off.
5. DISPOSAL OF AN EXHAUSTED BATTERY
PACK
To preserve natural resources, please recycle
or dispose of the battery pack properly. This
battery pack contains Lithium batteries.
Consult your local waste authority for information
regarding available recycling and/or disposal
options. Discharge your battery pack by operating
your drill, then remove the battery pack from the drill
housing and cover the battery pack connections
with heavy-duty adhesive tape to prevent short
circuit and energy discharge. Do not attempt to
open or remove any of the components.
6. OVERLOAD PROTECTION
When overloaded, the motor comes to a stop.
Relieve the load on the machine immediately and
allow cooling for approx. 30 seconds at the highest
no-load speed.
Fig. 1-1
Fig. 1-2
Fig. 1-3
Fig. 2
Fig. 3
Fig. 4