Erbauer ERB807A, Руководство пользователя, Страница: 14 / 20

on both sides of the sheet to reduce vibration
or tearing of the sheet metal. Both wood and
sheet metal must be cut. Do not force the cutting
blade when cutting thin metal or sheet steel as
they are harder materials and will take longer to
cut. Excessive blade force may reduce the life of
the blade or damage the motor. To reduce heat
during metal cutting, add a little lubricant along
the cutting line.
ENVIRONMENT PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.
PLUG REPLACEMENT
The fuse in the main plug of your power tool
should always be replaced with one of identical
rating.
Check the voltage given on your power tool
matches the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug
follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in
accordance with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured blue must be connected
to the terminal that is marked with the letter N.
The wire that is coloured brown must be
connected to the terminal that is marked with the
letter L.
A 13AMP (BS1363 or BS1363/A) plug must be
used and a 5 AMP fuse must be fitted.
SFX-ERB807A-M-050920.indd 14 2005-9-20 15:40:04