manualshive.com logo in svg

Erbauer ERB609MSW, Оригинальное руководство пользователя

Поделиться
Скачать
Erbauer ERB609MSW Скачать руководство пользователя страница 9

ERBAUER 210MM (8-1/4”) SLIDING COMPOUND MITRE SAW

12. When the correct blade to cut the material has been fitted, this saw is 

recommended for cutting wood, non-ferrous metal and plastic only.  

 

13. Do not use saw blades with High Speed Steel (HSS) or damaged or deformed 

blades. 

 

14. Replace the table insert when worn.  

 

15. Use only saw blades recommended by the manufacturer and which have the 

exact bore and diameter required for this machine.  

 

16. Connect your mitre saw to a dust collecting device (I. D.Ø32mm) when sawing. 

 

17. Select saw blades in relation to the material to be cut. 

18. Check the maximum depth of cut.  

 

19. When sawing long work pieces, always use extra support to provide better 

support, and use clamps or other clamping devices.  

 

20. The operator is adequately trained in the use, adjustment and operation and 

operation of the machine.  

 

21. Provide for adequate room lighting at your workplace or for adequate lighting 

of the immediate work area.  

 

22. When fitted with laser no exchange with different type of laser is permitted. 

Repairs shall only be carried out by the laser manufacturer or an authorised agent.  

 

23. Refrain from removing any cut-offs or other parts of the workpiece from the 

cutting area whilst the machine is running and the saw head is not the rest position.  

 

24. Never stand on this tool. Serious injuries could occur when this tool tips over 

or when coming in contact with the saw blade. 

 

 WARNING!

 the operation of any mitre saw can result in foreign objects being  

 

thrown into your eyes, which can result in severe eye damage. Before 

beginning power tool operation, always wear safety goggles or safety glasses with 

side shield and a full face shield when needed.  

 

WARNING!

 If any parts are missing, do not operate your mitre saw until the  

 

missing parts are replaced. Failure to follow this rule could result in serious  

personal injury. 

 

Caution: 

Do not let familiarity with your mitre saw make you careless. Remember 

that a careless fraction of a second is sufficient to cause severe injury.  

Содержание ERB609MSW









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды