Erbauer ERB30Y, Руководство пользователя, Страница: 12 / 16

Always check there is sufficient grease in the
grease box before usage. Check every 5 hrs of
usage. Open the grease box lid at the top of the
drill using the pin spanner provided. Then top
up the grease box (capacity 20gms max) using
the grease provided with your tool. The grease
specification is general purpose lithium based.
See Fig 13
12. CHANGING THE CARBON BRUSHES
When the carbon brushes need replacing call the
help line.
13. CHISEL AND DRILL BITS
Do not use damaged/chipped/blunt drill bits.
Inspect drill bits and chisel bits regularly for sign
of damage and sharpness and replace where
necessary.
MAINTENANCE
1 Your power tool requires no additional
lubrication or maintenance.
2 There are no user serviceable parts in your
power tool.
3 Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth.
4 Always store your power tool in a dry place.
5 Keep the motor ventilation slots clean.
6 If you see some sparks flashing in the ventilation
slots, this is normal and will not damage your
power tool.
HANDY HINTS
Always use sharp good quality drill bits and
chisels. The performance of the drill is dependant
on the quality of the bits used.
• Reduce the pressure on the drill bit when it is
about to break through. This will prevent the drill
from jamming.
• When drilling a large hole, first drill a pilot hole
using a smaller drill bit.
• Always apply pressure to your drill bit in a
straight line, and if possible at right angles to the
workpiece.
• When drilling holes into walls, floors etc., always
make sure that there are no live electrical wires,
Fig 13
������