Erbauer ERB234MSW, Оригинальное руководство пользователя

Страница: 35 / 40

ERBAUER 254MM (10”) DOUBLE BEVEL SLIDING MITRE SAW
WARNING! Do not use solvents on the
guard. They could make the plastic “cloudy”
and brittle.
WARNING! When cleaning the lower
guard, unplug the saw from the power
source ` to avoid unexpected startup.
Sawdust
Periodically, sawdust will accumulate under the work
table and base. This could cause dificulty in the
movement of the worktable when setting up a mitre cut.
Frequently blow out or vacuum up the sawdust.
WARNING! If blowing sawdust, wear
proper eye protection to keep debris from
blowing into eyes.
Lubrication
All the motor bearings in this tool are lubricated with a
suficient amount of high grade lubricant for the life of
the unit under normal operating conditions; therefore,
no further bearing lubrication is required. Lubricate
the following as necessary: Chop pivot: Apply light
machine oil. Central pivot of plastic guard: Use light
household oil (sewing machine oil ) on metal-to-metal
or metal-to-plastic guard contact areas as required
for smooth, quiet operation. Avoid excessive oil, to
which sawdust will cling. Guard arm: (which actuates
the lower guard movement) may be oiled at the rear
pivot, greased at ball bearing contact, and oiled
where the guard arm actuates the acetyl roller of the
lower guard, if the down chop motion is hard.