Erbauer ERB112BTE, Руководство пользователя

Страница: 6 / 19

11. Always allow a new wheel to run for a few minutes at full speed before using it.
Stand to one side at start up.
12. Check that the wheel rotates freely each time before start up.
13. Do not use the grinder unless all the guards are properly fitted and secure.
14. Check that the work rests are properly adjusted before commencing use.
15. Do not overload the grinder. Allow the grinder to run at full speed, or close to full
speed during use.
16. Never apply excessive pressure to the wheel. It might shatter causing personal
injury.
17. Make sure that the wheel is not in contact with the work when you start the grinder.
18. When using the grinder, use safety equipment including safety goggles, shield, ear
protection, dust mask and protective clothing including safety gloves.
Important note
Remove the mains plug from socket before carrying out any adjustment or servicing.
Ensure your mains supply voltage is the same as your tool rating plate voltage.
SYMBOLS
Read the manual
Warning
WEEE marking
Wear dust mask,eye & ear protection