Erbauer 3663602796442, Оригинальное руководство пользователя

Страница: 20 / 30

Use
Intended use
This product is intended for planing of firmly supported wooden materials, such as
beams and boards. It is also suitable for bevelling edges.
The product must be used in an upright position only with the front plate lying flat on
the workpiece. It may not be used upside down or as stationary product on a work
bench.
Before you start
01
Protection
Controls
01
Planing depth adjustment (Fig. E)
WARNING! Always switch the product off and disconnect it from power
supply before making any adjustments!
Adjust the desired planing depth by turning the cutting depth adjustment knob (4). The
depth can be adjusted from 0 to 4 mm. The number on the scale (3) next to the pointer
indicates the depth of cut in millimeters.
02
Switching on/off (Fig. F)
1. Press the lock-off button (7) and hold it in position.
2. Press the on/off switch (6) to switch on the product.
3. Release the on/off switch ( 6 ) to switch the product off.
20