Erbauer 3663602795193, Оригинальное руководство пользователя

Страница: 23 / 32

23
Care & maintenance
WARNING! Always switch the product off, disconnect the product from
the power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
Only perform care and maintenance work according to these instructions!
All further works must be performed by a qualified specialist!
Clean
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. In particular clean the chuck, switches and air vents after every use with a cloth
and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar).
4. Check for worn or damaged parts. Replace worn parts as necessary or contact an
authorised service centre for repair before using the product again.
Do not use chemical, alkaline, abrasive or other aggressive detergents or
disinfectants to clean this product as they might be harmful to its surfaces.
Maintenance
Before and after each use, check the product and accessories (or attachments) for
wear and damage. If required, exchange them for new ones as described in this
instruction manual.
01
Lubrication
The lubrication of the gear box behind the grease box cover (11) should be checked
once the hammering force is noticeably reduced.
1. Loosen the screws with a proper hex key and remove them together with the
gearbox cover (11).
2. Fill the gear box with suitable grease.
3. Fit the gearbox cover (11) back onto the product and secure it with the screws.
Make sure it is properly fastened.