20
18
Setup
ERA CCTV
Select appropriate camera channel, e.g. CAM1 (scroll using the
previous and next arrows).
A message will be displayed on the monitor screen. A timer on
the monitor will count down from 30 to 0, you must press the
“
Pair
” button on the camera power cord during this time to
successfully pair the camera. If the button is not pressed during
the countdown “
Par Fail
” will be displayed and the pairing
will be unsuccessful.
Repeat for each additional camera.
Turn on the Monitor/DVR and cameras by connecting them
to power outlet with the supplied power adapter. If using DVR
please connect to external monitor for setup using “
AV Output
”.
Press the “menu” button on the monitor/DVR (or the remote
control) and select “
Camera
Setting
”. To select press “
PLAY
”.
Select “
Pairing
”
When purchased as a kit the cameras are automatically pre-paired to
the monitor/DVR. You only need the following information, if you
have purchased additional cameras.
NOTE: It’s highly recommended to pair the cameras to the receiver
before permanently mounting the cameras.
The pairing function assigns each camera to a different channel on
the wireless receiver (up to 4 cameras in total) and enables you to
configure additional cameras.
6.7 Camera Pairing
4
3
2
1
6
5
6.6 Playback Operation
To view recorded files press “
MENU
” and select “
Playback
”. Open the created folder by
pressing “
PLAY
”.
Browse through the recordings using the up and down buttons. A recording is selected with
the “
PLAY
” button.
To play or pause the recording use the “
PLAY
” button.
To rewind or fast-forward the recording use the previous and next button. To increase the
speed press multiple times.
4
3
2
1