
4.4. Usage
Please connect the 9V battery and press the power on/off button prior.
Please note: after charging the battery for 12-24 hours, please remove the 9V battery.
When installed as part of an ERA Alarm System, the Siren must be registered to the
control panel only.
Press the Learn button on the Solar Siren (0.5 seconds), the system goes into Learn
Mode after one beep is heard.
Press the Arm Button on the Control Panel app.
The Wireless Accessory is learned successfully after a second beep. If two beeps are
heard, the accessory is already linked.
To finish learning the siren, press the Learn button on the siren again to exit
Learn Mode after one beep.
The Control Panel is now Armed, press Unlock to Disarm the Control Panel.
The Siren arms 15 seconds after the Control Panel - please consider this when testing
the Siren. The Siren will sound and the strobe lights will flash upon alarm activation.
Disarming the system will stop the siren sounding. If not disarmed the Siren Status
Indicator will flash once every 2 seconds for one hour (visual notification of an alarm
event).
Connecting to a Control Panel
5.
4.
3.
2.
1.
When installed as a Siren only Alarm System (without a Control Panel), all of the Alarm
Accessories must be registered to the Siren.
Connecting a Wireless Accessory to the Siren
Press the Learn Button on the Solar Siren (0.5 seconds), the system goes into Learn
Mode after one beep is heard.
Press the Test Button on the Accessory or trigger the Accessory once.
The Wireless Accessory is learned successfully after a second beep. If two beeps are
heard, the accessory is already linked.
To finish learning the Accessories, press the Learn Button on the Siren again to exit
Learn Mode after one beep. The ‘Arm’ button will arm the siren with a 15 second exit
delay. Sensors on the ‘single delay’ will have an entry delay of 15 seconds before the
alarm sounds (unless disarmed by the Remote Control during the delay period).
Sensors on the ‘normal zone’ will activate the alarm without a delay, i.e. the Siren
will sound immediately. The Siren will sound and the strobe light will flash upon
activation of a connected Accessory. Disarm the system to stop the siren sounding.
If not disarmed the Siren status indicator will flash once every 2 seconds for one hour
(visual notification of an alarm event).
4.
3.
2.
1.
Page 9