ERA TEVIN CV, Инструкция по эксплуатации, Страница: 3 / 16

3
EN
APPLICATION
Axial duct fan TEVIN of CV model (hereinafter referred to as fan) is an exhaust fan manufactured in
the following sizes: 150, 160, 200, 250 and 300 mm. Used in domestic exhaust ventilation.
ATTENTION!
• Electrical connection should be done by a qualified electrician!
• An obligatory element of the electrical system is a switch in which the distance between
the contacts of all poles is at least 3 mm.
• Fan grounding is required.
• Appropriate measures should be taken to avoid the return of gases to the room from a
chimney or other appliances with an open flame.
• CV type fans should not be used in rooms with a high amount of humidity, as well as
where explosive substances are located.
• The manufacturer reserves the right to make design changes.
• The device is not intended to be used by persons (including children) with reduced
physical, brain or mental abilities or in the absence of experience or knowledge if they are
not under control or instructed on the use of the device by the person responsible for their
safety. Children should be supervised in order to prevent playing with the device.
ORGANIZATION OF TEVIN FAN OF CV MODEL
The fan consists of:
1. aluminum profiled blades;
2. case for installation in the duct. Made of galvanized iron or sheet metal with a polymer coating
resistant to corrosion and mechanical damage;
3. individual single-phase asynchronous motor (S1), which can operate continuously. It is characterized
by quiet work in relation to efficiency.