ERA E2000 Скачать руководство пользователя страница 5

Страница: 5 / 56

Additional Accessories

Additional Accessories are available for the E2000 Digital Telephone & Intercom system. Including:

Additional Handset and Charger E2000HSC

Outdoor Station Rain Cover CLOSRC

Outdoor Station Power Supply CLOSPSU

Unlock Module

CL3660UM

Notes

Safety Precautions

1. Follow all warning symbols as marked on the product parts.

2. Avoid spilling liquid on the telephone handset or base station.

3. Unplug this product from the wall outlet before cleaning, then use a damp cloth to wipe. Do not use liquid or aerosol

cleaners.

4. Do not place objects on the power supply line cord that may cause damage.

5. In the event of the product developing a fault refer servicing to an ERA Approved Repair Centre only.

6. Pay attention to the polarity of the batteries, insert batteries in accordance with polarity symbols (this instruction is

found in the ‘installing batteries’ section.)

7. Use only the rechargeable batteries supplied/as indicated in the Instruction Manual.

8. Do not mix exhausted batteries with full batteries. Exhausted batteries must be disposed of in a responsible manner.

9. If the telephone handset is not to be used for a long period of time, remove the batteries to prevent possible leakage.

10. Use only the power supply indicated in the Instruction Manual.

Содержание E2000

























































Результаты поиска

Содержание E2000

Отзывы:

Похожие инструкции для E2000

Бренды по названию

Популярные бренды

ERA E2000, Инструкция по эксплуатации

Результаты поиска

Содержание E2000

Отзывы:

Похожие инструкции для E2000

Бренды по названию

Популярные бренды