WFS 500 CX
USER MANUAL
VERSION 1.0
WFS 500 CX
www.workpro.es
5
2.
TECHNICAL SPECIFICATIONS
Acoustical specifications
LF Transducer ................................................ 1x 10
”
diameter, 2.5
” voice coil speaker
HF Transducer ....................................... 1x
1” exit, 1
.75
” voice coil compression driver
Nominal Impedance ........................................................................................ 8 ohm
Recommended amplifier power ....................................................... 500Wrms(89.5Vp)
RMS Power
(1)
.................................................................................................. 500W
Program Power
(2)
.......................................................................................... 1000W
Sensitivity (2.83v @ 1m) ............................................................................ 100dB SPL
Frequency Range
(3)
.............................................................. 66Hz
–
19.2kHz (-10dB)
.................................................................... 86Hz
–
17.3kHz (-6dB)
Recommended High Pass Filter ........................................ Butterworth 24dB/Oct, 50Hz
Horizontal Coverage (-6dB) .................................................................................. 80°
Vertical Coverage (-6dB) ...................................................................................... 60°
IP Rating ........................................................................................................... IP65
Other specifications
Enclosure ................................................................................................... Fiberglass
Grille ........................................................................ Steel, water proof fabric backing
Connection .................................................. Two pole stripped wire for low impedance
Color .................................................................................................. Black or White
Rigging ............................................................................ Wall mounting accessories:
WSTB 10 H (included): for 0º to 45º tilt in 7.5 degrees steps
WSTB 10 V (optional): for continuous ±90º sideways
Dimensions (HxWxD) ........................................ 328x594x461 mm, 12.9x23.4x18.1 in
Weight ............................................................................................. 19.8 kg, 43.6 lb
(1)
Based on a 2 hours power test run with conventional program signal
(2)
Conventionally, 3dB higher than the RMS power
(3)
Free field