Equipex SODIR BAR100, Руководство по эксплуатации

Страница: 4 / 11

INTRODUCTION
The SODIR Model # BAR-100 and # BAR-200 countertop snack toasters offer speedy
toasting and finishing. The units are designed for commercial applications, especially
when small footprint is an issue. The snack toasters are constructed of stainless steel and
are equipped with quartz heating elements, a 4-position switch, a 15-minute timer with
hold position and a red pilot light. Model # BAR-100 comes with one wire rack, while #
BAR-200 comes with two of wire racks. Each unit is equipped with an easily removable
rack handle.
SPECIFICATIONS
Model Electrical Plug Configuration
BAR100/1 120V, 1PH, 1.7KW, 14A NEMA-5-15P
BAR100 208/240V, 1PH, 1.7KW, 7/8A NEMA-6-15P
BAR200 208/240V, 1PH, 2.6KW, 11/13A NEMA-6-15P
INSTALLATION
The SODIR snack toasters need to be connected to a grounded outlet of proper voltage
(208/240V or 120V) depending on the model. DO NOT place the unit in a damp area or
near steam source. Make sure that the back panel of the snack toaster is not blocked.
OPERATION
The snack toasters are simple to operate. Turn the toaster on by rotating the
switch to one of the three following positions: "ALL ELEMENTS ON", "TOP
ELEMENTS ON”, or "BOTTOM ELEMENTS ON”. Turn the timer knob clockwise to
select the desired time. By turning the timer knob to the "HOLD" position indicated
by the marking "C" on the time dial, operate the unit in continuous mode. To take
the wire rack out of the toaster, attach the handle provided with the unit to it.
Always use the drip tray.