MAINTENANCE
Your pump has been designed and built to require minimum
maintenance. Check the pump casing and pipe joints frequently for
leaks. Keep pump and unit clean and shelter from adverse weather
conditions. Every 3 months check and clean the suction strainer as
necessary.
IT IS THE IN-
STALLERS
RE-
SPONSIBILITY TO CONNECT THE UNIT USING PIPEWORK OR
HOSE APPROVED FOR USE WITH DIESEL FUEL.
MAKE SURE ANY ADDITIONAL ACCESSORIES SUCH AS
DELIVERY FILTERS OR FILLING DEVICES ETC., ARE SUITABLE
FOR USE WITH FUEL TRANSFER.
For vertical suction length over 2 Metres a foot valve with filter is
required to ensure priming function.
For suction lengths over 2.7 Metres or a horizontal suction length over
4.5 Metres use a pipe for hose with minimum
1”
(25mm) bore.
TECHNICAL FEATURES
-
BT46 Pump of grey foundry cast iron
Self suction. Eccentric with a auto adjustable vanes
-
Flow 40 LPM max
-
With recirculation by
-
pass valve
-
Motor: 140 watt 12 volt 140 watt 24 volt
-
By
-
pass pressure: 1.5
-
1.9 bar
-
Consumption: 18
-
24A (12DC)
-
9
-
17A (24VDC)
-
RPM 4200 RPM
-
Inlet/Outlet Pipe:
1”
Gas (BSP)
-
IP
-
55 Protection
-
With clamps for the connection to battery 12 or 24VDC
-
NOTE: When you use an automatic nozzle, the flow shall be reduced.
ATTENTION
KIT CONTENTS
BT46
Composed of:
-
BT46 12 / 24 Volt pump only
-
Cable, clamps and fuse
OPTIONS
Automatic Nozzle
Filter
Flow Meter
BT46M
Composed of:
-
BT46 Pump
-
4 Mtrs rubber hose
-
Manual nozzle
BT46SK / BT46SKA
(
Please ensure pump is mounted
horizontally)
Composed of:
-
BT46 Pump
-
4 Mtrs rubber hose
-
Manual or auto nozzle with swivel
-
2 piece poly suction pipe with socket
-
Rotating drum / tank connector
-
Lockable nozzle holster