2
sink back
7, 8
20
21
1
Instructions
Installation: (5GF-W-F & 5GF-W)
1. Turn off water supply and drain lines.
Hand tighten no.
20
fi rmly against no.
1
and remove no.
21
from no.
1
.
2. Drill 7/8” hole in sheet metal. Insert no.
1
through hole and screw no.
21
on back of no.
1
,
leaving no.
20
free to turn.
3. Apply tefl on tape or pipe joint compound to
threads of water supply line. Connect no.
1
to
water supply line outlet, tightening as far as possible.
4. Tighten no.
20
and no.
21
so they are fl ush against surface of sink back.
5. Turn on water supply and check for leaks.
Flow Adjustment:
To adjust water flow, loosen no.7 with a wrench, then use
screwdriver to turn no.8 to desired setting. Tighten no.7 when flow
adjustment is complete.
1
7, 8
23
24
26
25
countertop
22
Installation: (5GF-8P & 5GF-8P-WS)
1. Turn off water supply and drain lines.
2. Unscrew and remove no.
26
and no.
25
from no.
23
. Position no.
24
to cover threads
of no.
23
.
3. Place no.
23
through 7/8” hole in
countertop. Replace no.
25
and no.
26
onto
no.
23
and tighten with a wrench at bottom
side of countertop.
4. Screw no.
1
into no.
22
and tighten fi rmly.
5. Apply tefl on tape or pipe joint compound
to threads of no.
23
, connect to water supply
line inlet.
6. Turn on water supply and check for leaks.
To adjust water flow, please refer to
flow adjustment note for 5GF-W-F &
5GF-W models.
