5.
Hardware Installation
(1) Turn your computer off and disconnect the power cord before installing 128285.
(2) Remove your computer’s cover. (Please refer to the user manual of your
computer for instructions on removing the cover)
(3) Locate an available PCI Express expansion slot and remove the bracket cover.
(4) Insert the card carefully into a free PCI Express slot and make sure the
gold-plated bus is seated evenly in the PCI Express slot.
(5) Fasten the PCI Express card’s mounting bracket securely to the rear computer
case with screws; it can avoid the card falling out accidentally when plug in the
external USB device.
(6) Connect little 4P power cable on your main board and 128285.
(7) Before reinstalling your computer’s cover, please make sure no tools or screws
left inside your computer case.
(8) Reconnect AC power cord and turn the power on.
6.
Software Installation
System support:
Windows XP/VISTA/7 (32/64bit)
(1) Insert the Driver Dick into the optical disk drive.
(2) Select “128285”
(3) Click
Windows Driver
and
Next
to continue
(4) Check
I Agree
and click
Next
to proceed the installation
