Equinox Systems Vapour 1000, Руководство пользователя

Страница: 4 / 8

www.prolight.co.uk Vapour 1000 User Manual
4
On startup the LED display on the rear of the unit will show
Up
whilst the unit it heating up.
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX address mode, press the
“MENU” button on the rear of the unit to show
Addr
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN”
buttons to set the required DMX address. Press the “ENTER” button to confirm the setting.
Manual control mode:
To access the Manual control mode, press the
“MENU”
button on the rear of the unit to show
out
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose the
desired haze amount between
F001
~
F100
. Press the
“ENTER”
button to confirm the setting.
To suspend the haze output press and hold the
“ENTER”
button to show
read
. To resume the haze
output press and hold the
“ENTER”
button again. The display will now show the last selected value.
To exit out of any of the above options, press the “MENU” button.
Value: 001 - 100 (001 = no haze output, 100 = maximum haze output)
Master/slave mode:
To set the unit in master/slave, press the “MENU” button on the front of the unit to show
SLnd
on the
LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
NASt
~
SLAu
. Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Operating instructions Operating instructions
MENU
DMX address setting
0 0 1
5 1 2
A d d r
Master/slave mode
N A s t
S L A v
S L n d
1 channel mode:
Channel Value Function
CH1 000-255 Haze output (0-100%)
Manual control mode
r e a d
F 0 0 1
F 1 0 0
o u t