Equinox Systems Swing Batten, Руководство пользователя

Страница: 8 / 12

www.prolight.co.uk Swing Batten User Manual
8
Operating instructions
Master/slave mode:
To set the master unit, press the “MENU” button on the front of the master unit to show
SLNd
on the
LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose
Nast
.
Press the “ENTER” button to confirm the setting. Then select your desired program (sound active, DMX
or one of the built-in programs).
To set the other units in slave mode, press the
“MENU” button on the front of the unit to show
SLNd
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose
either
SL1
(Slave 1) or
SL2
(Slave 2). Press the “ENTER” button to confirm the setting. The unit will
now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Show mode (built-in programs):
To access the show modes, press the “MENU” button on the front of the unit to show
ShNd
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the
show you require from
Sh 0
~
Sh 8
. Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Sound active mode:
To access the sound active mode, press the “MENU” button on the front of the unit to show
SoUn
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the
sound mode on or off. Press the “ENTER” button to confirm the setting.
To adjust the sound sensitivity, press the “MENU” button on the front of the unit to show
Sens
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the
sound sensitivity
0
~
100
. Press the “ENTER” button to confirm the setting.
Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity)
To exit out of any of the above options, press the “MENU” button.