2
Equinox ESP 10/100 Serial Hub Product Installation Guide
Section 1 - Hardware
The Equinox SuperSerial Technology (SST) Ethernet Serial Provider
(ESP) can be installed in a local or remote LAN to provide access for
widely distributed serial devices. The ESP is supported under Windows
2000, Windows NT 4.0, Windows NT 3.51, OpenServer 5.0.5a or higher,
UnixWare 7.0.1a or higher, Linux and AIX 4.3 and 5.1.
The ESP can be managed using EquiView Plus, the Equinox premier serial
port management software, running on any Microsoft Windows host, or
espdiag and espcfg for OpenServer, UnixWare, Linux or AIX.
The ESP kit contains the items listed in Table 1.
Part No.
Description
990380
8-port ESP Unit
or
990381
16-port ESP Unit
590272
Installation Guide (this document)
750121
Loopback Connector
650185
Equinox SuperSerial Software CD
770379
Two Wall-mount Brackets
Table 1. ESP Kit Contents
Special-order accessories for the ESP are available, as listed in Table 2.
Part No.
Description
Modular Adaptors
210090
RJ-45 to DB-25 DTE Male Adaptor
210091
RJ-45 to DB-25 DTE Female Adaptor
210092
RJ-45 to DB-25 DCE Male Adaptor
210093
RJ-45 to DB-25 DCE Female Adaptor
210094
RJ-45 to DB-9 Male Adaptor
210095
RJ-45 to DB-9 Female Adaptor
Modular Cables
690026
10-foot 8-wire Reversing Modular Cable
690227
25-foot 8-wire Reversing Modular Cable
690228
75-foot 8-wire Reversing Modular Cable
Rack Mount Shelf
790180
Rack Mount Shelf
Wiring Starter Kit
750122
Wiring Starter Kit includes six adaptors (210090, 210091,
210092, 210093, 210094 and 210095) and a 10-foot 8-wire
modular cable (690226)
Table 2. Special-Order Accessories
