manualshive.com logo in svg

Equinox Systems MEGAPORT, Справочник по аппаратуре

Поделиться
Скачать
Equinox Systems MEGAPORT Скачать руководство пользователя страница 11

Introduction

5

Chapter 3 - Connecting Devices to CS and FM Ports

Chapter 3 describes the procedures used to connect devices to
MEGAPORT CS boards (12CS, 24CS and the second 12 ports
on the 12LD+12CS) and MEGAPORT 12FM boards.  Included
are wiring diagrams for assistance in building adaptors and
cables.

Chapter 4 - Connecting Devices to LD Ports

This chapter describes the procedures used to connect devices
to MEGAPORT LD boards (12LD, 24LD and the first 12 ports
on the 12LD+12CS).  Included are wiring diagrams for assis-
tance in building adaptors and cables.

Equipment Checklist

A MEGAPORT package contains:

●

MEGAPORT* Board
Installs in any 80286-, 80386- or 80486-based computer.

●

1" Interconnect cable (MEGAPORT only)
Used to connect multiple MEGAPORT boards together.

●

EISA Jumper (MEGAPORT only)
For EISA bus computers.

●

UNIX/XENIX Device Driver Kit
Provides the software and manual required for installing
MEGAPORT boards in systems running the UNIX System
V 3.2/386 operating system, the 286 or 386 SCO XENIX
operating system and compatible variants.

●

UNIX STREAMS Device Driver Kit
Provides the software and manual required for installing
MEGAPORT boards in systems running the UNIX System
V Release 4 STREAMS operating system and compatible
variants.

●

AIX-2 Device Driver Kit (MEGAPORT/2 only)
Provides the software and manual required for
installing MEGAPORT/2 boards in systems running IBM
AIX Version 2.

●

AIX-3 Device Driver Kit (MEGAPORT/RS only)
Provides the software and manual required for installing
MEGAPORT/RS boards in systems running IBM AIX
Version 3.

Содержание MEGAPORT





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды