LUXE
8000i FAMILY INSTALLATION GUIDE
STEP 1: Turn Terminal Over & Insert Cable
SIDE VIEW
STEP 3: Rotate Cable Down & Press Firmly
to Lock in Place, then Screw to Secure
+
+
Moun7ng
Holes
+
+
STEP 2: Angle and Push Cable In
Against Terminal
ENLARGED VIEW
ENLARGED VIEW
Rotate
Down
to Lock
NOTE:
To remove cable, disconnect power source and then turn the terminal over. Use screwdriver to remove
the screw from the cable end. Push cable end in (against the terminal), then lift (rotate) cable up to remove.
NOTE:
Use small
Philips
screwdriver
(not provided)
to install
cable.
Use screwdriver
to secure cable
STEP 4: Turn Terminal Over & Connect Power Source
Visually inspect both the MSR & Smart Card Reader slots for any foreign objects that may obstruct, hamper or prevent the
sliding or inserting of your card. If an object exists, do NOT use the device and immediately notify your supervisor for the
device may be comprised. If no objects exists, use device as normal.
A
C
C
E
S
S
O
R
IE
S
Power w/Serial Adapter
Cable (810450-002E)
Power Supply (870088-001E)
NOTE:
Use with 810003-001.
RJ9 to DB9F Cable (810449-001E)
NOTE:
Use with 810450-004E .
A
A
A
B
PUSB Adapter (810450-004E)
NOTE:
Use with 810449-001E.
Power w/USB Adapter
Cable (810450-003E)
To place an order, contact your Equinox Sales
person or:
•
1.877.497.3726 or 480.551.7800
•
Power w/Ethernet Adapter
Cable (810450-001E)
NOTE:
Use M3
threaded
mounting
screws
(no more than
8mm of
engagement;
arranged in a
50mm x 50mm
pattern).
Screws not
provided.
INSPECT SLOTS FOR FOREGIN OBJECTS
MSR Slot
Smart Card
Reader Slot
940662-001E
Power Cord (810003-001)
NOTE:
Use with 870088-001E.