Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 100

background image

36

CCM4850 Installer/User Guide

In the following example, the keyword value “576” is not valid. Numeric keyword values must be
fully specified and may not be shortened to three characters.

> POR 2 SET BAUD=576 FLOW=XON
---
ERR 27 - SET keyword value invalid

In the following example, there are spaces between BAUD, the equal sign and the value 57600.
Spaces are not permitted between keyword parameters and their values.

> POR 2 SET BAUD = 57600 FLOW=XON
------------
ERR 26 - SET keyword parameter invalid

Syntax conventions

This manual uses the following command syntax conventions:
•

Brackets [ ] surround optional keywords and values.

•

Angle brackets < > surround user-supplied positional parameters and keyword parameter values.

•

In most cases, choices are separated by a vertical bar |. The description indicates if you may
specify more than one of the choices and how to separate multiple values. The exception is the
Server SSH command. In this case, the vertical bar is specified on the command line when you
wish to enable the “password or key” method (PW|KEY) or the “key or password”
method (KEY|PW).

Command Summary

Table 4.4 lists the CCM appliance commands, including a brief description plus the required access
rights and level.

Table 4.4: CCM Appliance Command Summary

Command

Description, Access Right and Access Level

Connect

Accesses devices from the console port.
Access right: port-specific
Access level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or
APPLIANCEADMIN level must have the appropriate port access configured to issue
this command.)

Disconnect

Ends a device session initiated with Connect command.
Access right: port-specific
Access level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or
APPLIANCEADMIN level must have the appropriate port access configured to issue
this command.)

Help

Displays information about commands.
Access right: none needed
Access level: all

«
...
46
47
48
49
50
...
»

Содержание Equinox Console Manager CCM4850 CCM4850 CCM4850





































































































Отзывы:

Нет отзывов

Похожие инструкции для Equinox Console Manager CCM4850 CCM4850 CCM4850

Бренд: Paradyne Страницы: 2

Бренд: Paradyne Страницы: 20

Бренд: Paradyne Страницы: 2

Бренд: Zhone Страницы: 2

xCORE-200 Multi-channel Audio board

Бренд: XMOS Страницы: 112

Бренд: ETAS Страницы: 69

ACC-CX3RDK-CU5640

Бренд: e-con Systems Страницы: 9

Бренд: Fostex Страницы: 20

Бренд: IOtech Страницы: 16

ADSL/ADSL2/ADSL2+ Router 660R-6xC Series

Бренд: ZyXEL Communications Страницы: 282

Бренд: Sangamo Страницы: 2

HHM Series HHM2411

Бренд: TDK Страницы: 2

SmartMesh IA-510 D2511

Бренд: Dust Networks Страницы: 30

Бренд: Draytek Страницы: 2

Бренд: Genie Страницы: 6

InvenSense RoboKit1

Бренд: TDK Страницы: 13

RanaSystems 13-0010--001

Бренд: RANA Systems Страницы: 328

Бренд: SYNTEK Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды