manualshive.com logo in svg

Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850, Инструкция по установке и эксплуатации

Продукт Equinox Systems Equinox Console Manager CCM4850 предлагает пользователю широкие возможности управления сетью. Установщик/Пользовательский руководство можно бесплатно скачать с {веб-сайта}, обеспечивая простой доступ к необходимой информации для эффективной работы с устройством. Наслаждайтесь удобством и функциональностью с Equinox CCM4850.

Поделиться
Скачать
background image

 Chapter 2: Installation and Configuration        

7

3. Attach a 10BaseT, 100BaseT or 1000BaseT LAN interface cable to the LAN PORT connector 

on the back of the CCM appliance. A CAT 5 cable is required for 100BaseT operation. A CAT 
6 cable is required for 1000BaseT operation.

4. Insert the power cord into the back of the unit. Insert the other end of the power cord into a 

grounded electrical receptacle. Toggle the power switch on the back of the unit to the 
on position ( | ).

5. Check that the 

POWER

 LED on the front of the unit is illuminated. If not, check the power 

cable to ensure that it is inserted snugly into the back of the unit. The 

ONLINE

 LED will illu-

minate within two to three minutes to indicate that the self-test is complete. If the 

ONLINE

 

LED blinks, contact Equinox Technical Support for assistance.

6. Check that the LAN port LEDs indicate that a 10, 100 or 1000 Mbps link exists. If not, check 

the Ethernet cable to ensure that both ends are correctly inserted into their jacks. If the unit is 
connected to a 100 MB Ethernet hub, the 

100MBps

 LED will also be illuminated.

7. Once the 

POWER

 and 

ONLINE

 LEDs and a valid LAN LED link sequence are illuminated, 

proceed with the configuration process (if you will be using BootP, remove power from the 
CCM appliance).

Configuring the CCM Appliance

To configure the CCM appliance, you must specify a unique IP address, plus other network address 
information. This information will be stored in the CCM configuration database. During initial 
login, you will specify a password for the Admin user.

Configuring the network address settings

You may configure the CCM appliance network address settings using AVWorks software, BootP 
or the serial CLI on the console port.

To configure the network address settings using AVWorks software:

Using the AVWorks New Appliance Wizard is the easiest method to configure the CCM appliance 
network address settings. See the AVWorks Installer/User Guide for instructions. After the 
network address settings are configured, see 

Initial CCM appliance login

 on page 9.

To configure the network address settings using BootP:

1. Ensure that there is a BootP server on your network that is configured to correctly respond to a 

BootP request from the CCM appliance. BootP servers require the Ethernet MAC address of 
network devices. The Ethernet MAC address is located on the back of the unit. See your BootP 
server’s system administrator guide for information about configuring the BootP server.

2. After you have configured your network’s BootP server with the CCM appliance Ethernet 

MAC address, IP address, subnet mask and gateway, restore power to the CCM appliance and 
wait for the 

ONLINE

 LED to illuminate. Once this occurs, the CCM appliance has completed 

the BootP protocol, obtained its network address information and stored these in FLASH.

Содержание Equinox Console Manager CCM4850 CCM4850 CCM4850





































































































Отзывы:

Нет отзывов

Похожие инструкции для Equinox Console Manager CCM4850 CCM4850 CCM4850

Watchguard AP200 Setup Manual preview
AP200
Бренд: Watchguard Страницы: 40
3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Бренд: 3Com Страницы: 4
DataRemote CDS-9010 Quick Start Manual preview
CDS-9010
Бренд: DataRemote Страницы: 2
Paradyne 3172 Quick Reference preview
3172
Бренд: Paradyne Страницы: 20
Paradyne Compshere 3000 Series Notice preview
Compshere 3000 Series
Бренд: Paradyne Страницы: 2
Pantech Sprint PX-500 Quick Start Manual preview
Sprint PX-500
Бренд: Pantech Страницы: 17
IBA Com-L2B-4-8 Manual preview
Com-L2B-4-8
Бренд: IBA Страницы: 29
Dentsply Sirona inLab Speedcure 9494800 Instruction Manual preview
inLab Speedcure 9494800
Бренд: Dentsply Sirona Страницы: 91
Orban OPTIMOD 6300 Operating Manual preview
OPTIMOD 6300
Бренд: Orban Страницы: 255
Stephen STES2026 Configuration Manual Manual preview
STES2026
Бренд: Stephen Страницы: 102
Omron ACCURAX G5 - Quick Start Manual preview
ACCURAX G5 -
Бренд: Omron Страницы: 13
Asante IntraCore 6524 User Manual preview
IntraCore 6524
Бренд: Asante Страницы: 150
Giacomini KPM36Y002 Manual preview
KPM36Y002
Бренд: Giacomini Страницы: 2
Renesas R0E530650CFJ30 User Manual preview
R0E530650CFJ30
Бренд: Renesas Страницы: 4
BWI PCI Duo/TP User Manual preview
PCI Duo/TP
Бренд: BWI Страницы: 5
Quantum QWCM Installation Manual preview
QWCM
Бренд: Quantum Страницы: 7
ARTERY AT32F421 Series Reference Manual preview
AT32F421 Series
Бренд: ARTERY Страницы: 337
ZALMAN Fatal1ty FS-V7 User Manual preview
Fatal1ty FS-V7
Бренд: ZALMAN Страницы: 9

Бренды по названию

Популярные бренды

Загрузить еще бренды