Equinox Systems EQLED76 Six Shooter, Руководство пользователя

Страница: 6 / 12

Equinox Six Shooter Operation Modes
6
Master/slave mode
To access the master/slave mode, press the “MODE” button on the rear of the unit to show
SLAv
on the LED display and press the “ENTER” button to confirm the setting. The unit will
now run in sequence with the master unit.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the “MODE” button on the rear of the unit to show
SUNd
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN”
buttons to set the sound sensitivity level from
SU.OO
~
SU.31
and press the “ENTER” button
to confirm the setting.
Note: SU00 = Low, SU31 = High
To exit out of any of the above options, press the “MODE” button.
Auto run mode
To select auto run mode, press the “MODE” button to show
AUTO
on the LED display.
To choose how many times the programme is repeated before moving on to the next, press the
“ENTER” button and use the “UP” and “DOWN” buttons to choose the number of repeats
required from
n001
to
n100
. Now press the “ENTER” button to show
5P0!
and use the
“UP” and “DOWN” buttons to increase or decrease the speed form
5P0!
to
5P99
. To add
strobe, press the “ENTER” button to show
FSQO
and use the “UP” and “DOWN” buttons to
increase or decrease the value from
FSQ1
to
FS99
.
Note: Values 00 = Slow, 99 = Fast
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MODE” button.
Built-in programmes mode
To select built-in programmes mode, press the “MODE” button to show
Pro!
on the LED
display and use the “UP” and “DOWN” buttons to select programmes
Pro!
to
Pr18
.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the programme
speed from
SP0!
to
SP99
. Now press the “ENTER” button and use the “UP” and “DOWN”
buttons to set the strobe speed from
FS00
to
FS99
.
Note: Values 00 = Slow, 99 = Fast
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MODE” button.
LED display mode
To select LED display mode, press the “MODE” button to show
led
on the LED display. Now
press the “ENTER” button and use the “UP” and “DOWN” buttons to select between ON or OFF.
Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the
“MODE”
button.
Note: ON = The LED display will stay on constantly, OFF = After the menu has not been
used after 20 seconds the display will blackout. To turn the display back on simply press
any one of the function buttons.