www.prolight.co.uk
Gigabar MKII COB System
User Manual
9
Operating the foot controller:
This foot controller is made specially for the Gigabar MKII COB system. Many of the built-in programmes
can be accessed via the 3 foot switches.
Strobe mode:
To set the unit in strobe mode via the foot controller, press the
“MODE”
button on the foot controller to
show
NASt
on the fixtures LED display. Now press and hold the
“ENTER”
button once for white strobe,
again for white sound stobe, and a third time for colour sound strobe.
Colour selection mode:
To set the unit in colour selection mode via the foot controller, press the
“MODE”
button on the foot
controller to show
CoL-
on the fixtures LED display. Now press the
“ENTER”
button to select the
desired colour.
Show mode:
To set the unit in show mode via the foot controller, press the
“MODE”
button on the foot
controller to show
Sh -
on the fixtures LED display. Now press the
“ENTER”
button to select
the desired show (shows 1-8).
Blackout:
To activate blackout, press the
“BLACKOUT”
foot switch. Once pressed, the unit will blackout.
Operating instructions
BLACKOUT
MODE
ENTER
www.prolight.co.uk
G I G A B A R
MKII COB SYSTEM
CoL1
- Red
CoL2
- Green
CoL3
- Blue
CoL4
- Yellow
CoL5
- Magenta
CoL6
- Cyan
CoL7
- White (RGB)
CoL8
- Colour change
(speed via sound)
