110-119
Blackout W/Gobo change
120-129
No Blackout W/Gobo change
130-199
No function
200-209
Reset all
210-255
No function
5. Troubleshooting
Following are a few common problems that may occur during operation.
Here are some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors and cables to see if
linked correctly.
2. If the DMX LED is on and no response to the DMX desk, check the address
settings and DMX polarity.
3. Try another DMX controller.
4.
Check if the DMX cables run near or run alongside high voltage cables that
may cause damage or interference to DMX signal.
C. No response to the sound
1. Make sure the unit is not receiving a DMX signal.
6. Fixture Cleaning
The cleaning of external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the en
vironment in which the
fixture operates: damp, smoky or particularly dirty surroundings can cause
a greater accumulation of dirt on the unit’s optics.
"
Clean with soft cloth using normal glass cleaning fluid.
"
Always dry the parts carefully.
"
Clean the external optics at least every 30 days.
