INSTALLATION INSTRUCTIONS
Before Use
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately
2 hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
This appliance is intended for household use.
Installation
This appliance is designed to be freestanding or built-in. (Refer to the sticker at the back
of this appliance).
This appliance is intended to be used exclusively for the storage of wine or
beverages.
Place the appliance on a floor that is strong enough to support it when it is fully loaded. To
level the appliance, adjust the front leveling feet at the bottom.
Be careful not to damage the appliance during transportation.
Install the appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.).
Do not install the appliance in moist areas or where it can be exposed to cold temperatures.
Plug the appliance into a dedicated, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord.
General Use
Store wine in sealed bottles.
Do not overload the cabinet.
Do not open the door unless necessary.
Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation.
2
