2
7
6. Cleaning
Wiping off the condensed water
and occasional cleaning is the
only maintenance needed.
NB!
In no circumstances use soap or
cleaning agents containing soda
and abrasive substances for the
cleaning.
1. Pull the plug out of the wall socket.
2. Remove the side tables and the bottle holder.
3. Remove the lid.
4. Remove the contents of the appliance.
5. Remove the detachable bottom.
6. Wipe the inside and outside surfaces with a damp cloth. The
addition of vinegar (cleaning vinegar, cooking vinegar or vinegar
essence) to the water is good for the prevention of mould
fungus.
7. Take the lid apart as shown on the drawing and
clean it.
8. Clean the detachable bottom and the lid parts
with lukewarm water and detergent.
9. Wipe all parts thoroughly after the cleaning.
10. Turn the slits in the sealing ring and in the hinge rubber strip
downwards when assembling the lid.
IMPORTANT :
When the Party Cooler is not in use, it must be completely dry inside to avoid
mould growth (if possible, leave the lid open).
