Equator OR 400, Руководство пользователя

Страница: 6 / 12

2
1.
Tilt the refrigerator slightly to screw the casters into the
bottom of the unit. Do not place it on its side as this may
cause damage.
2.
There are 4 casters. The 2 with locking levers should be
screwed into the front of the refrigerator and the other 2
casters without locks should be attached at the back.
3. Tighten the casters using a (12mm) wrench and 1/2"
ensure that all the casters are firmly installed.
Do not tilt the refrigerator at an angle of more than 45° when
moving it.
Place the refrigerator in a covered area to protect from direct
sunlight and heavy rainfall.
Place the refrigerator on a flat level surface.
If placing against a wall, leave at least 3 inches (8 cm) between
the back of the refrigerator and the wall to allow for adequate
ventilation.
Check the plug and cable before you connect the power and
ensure it is the correct 110 voltage.
Once in place, lock the two front casters to ensure that the
refrigerator does not move.
After moving the refrigerator in place, wait at least 10 minutes
before turning it on, in order to allow the coolant to settle.
Installation
The Outdoor Refrigerator is designed for outdoor use and can
withstand temperatures between 32
℉
-101
℉
(0
℃
to 38
℃
).
Installing Casters
Before moving the refrigerator, attach the 4 casters that are
included: