Equator BIC 244, Руководство пользователя

Страница: 17 / 24

If you want to set another burner to
switch-off automatically, press “ ”
key to until the desired timer indicator
blink, repeat the same steps.
If you want to check the remaining
time for another zone, press the
“ ” until the indicator for the
desired burner blinks.
If more than one switch-off time is
programmed, the shortest time
remaining will show in the display,
the indicator for that particular
burner will flash.
Cancelling the timer:
Press the “ ” until the indicator for
the desired burner blinks,
then press the “+” or “-” to set the
timer to“00”. The Timer display
will blink for 5 seconds and then turn
off, indicating that the timer
of selected heating zone has been
cancelled.
Your cooktop has a
residual heat indicator for each
Cooking Zone.
This indicator will warn that this area
has been used and is still giving off
enough heat to cause burns. Avoid touching the burner when this
indicator is shown. Although the
cooktop is OFF, the will stay lit
until the cooktop has cooled down.