EQUATION 88282985, Сборка, использование, руководство по обслуживанию

Страница: 47 / 63

Air purifier does
not run.
Poor effects of oil and
smell removal.
Cleaning light of filter
components does not
turn off.
Faults Diagnosis Possible Reasons Possible Solutions
TROUBLE SHOOTING
shall not play the appliance. Cleaning and user maintenance shall not be made by
children without supervision.(be applicable for the European Countries).
This appliance is not intended for use by persons (including childern) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. (be applicable for
other countries except the European Countries )
Children should be supervised to ensure that they do not play with the appliance.
Do not install the appliance in a location that may be exposed to combustible gas.
If combustible gas accumulates around the unit, it may cause fire.
If the appliance is knocked over during use, turn off the unit and unplug it from
the main power supply immediately. Visually inspect the unit to ensure there is no
damage. If you suspect the unit has been damaged, contact a technician or
customer service for assistance.
In a thunderstorm, the power must be cut off to avoid damage to the machine
due to lightning.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings.
Do not route cord under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
This appliance is intended to be used in household.
- Maybe forget to connect the
power wires or the connection
were not in good condition.
- Maybe forget to press down the
power switch.
- Maybe filter components are in
opposite position.
- Maybe the lifetime of filter
components is over.
- Maybe the air inlet is stuck by
something.
- Maybe does not press "TIMER"
button for 3 seconds after
cleaning filter components.
- Maybe filter components are
still in packaging bags.
- Please plug in the power well.
- Please press down the power
switch.
- Please install filter components
correctly.
- Please replace new filter
components.
- Please remove the things in air
inlet.
- Press "TIMER" button for 3
seconds after cleaning filter
components.
- Please remove packaging bags
of filter components.
Smell and smoke is
hard to remove.
46
FR
ES
PT
IT
EL
PL
RO
EN