Equalizer VLW18TE Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 26

Equalizer VLW18TE Скачать руководство пользователя страница 13

OPERATOR INSTRUCTION MANUAL

IM_VLW_Rev16_A4 (colour)

VLW18TE; VLW18TI

HYDRAULIC VERTICAL LIFTING WEDGES

12

5. Once the item has been lifted to the desired

height, or to the maximum height on the step

used, the safety block should be inserted into the

gap. Secure the load by releasing the pressure

onto the block.

SAFETY

BLOCK

6. If required, the wedge should then be re-insert-

ed on the next step and steps 3 - 5 repeated to

lift the item further.

WARNING:

Never place fingers under an

item being lifted.

Always ensure that both the wedge and the

safety block are inserted under the item until

the heel of the step is in contact with the side of

the item to be lifted and the step is positioned

centrally

(see VLW18TI TOOL FUNCTION step 3)

WARNING:

Care should be taken not to drop

any of the component parts when removing

them from the lifted load. This action will

prevent injuries to either the operator’s lower

limbs, or to passers by.

3. Place the wedge under the item to be lifted. The

step to be used must be fully inserted into the

access gap - ensure that the heel of the step is in

contact with the outer surface of the object to be

lifted and that the wedge is positioned centrally.









4. Advance the wedge by priming the pump.

PRIME

PUMP

«
...
11
12
13
14
15
...
»

Содержание VLW18TE



























Отзывы:

Нет отзывов