4
About Equalizer
®
Auto Glass Cut-Out Knife Sheaths…
The sheath is a unique patented idea that makes Equalizer
®
tools work. The sheath
is a protective sleeve that surrounds the blade so the blade will not damage the
dash or garnish mouldings. The sheath is designed to help you regulate the length
of the blade. This is important to keep the blade from hitting the pinchweld on
the outside. Sheaths are available in 4-inch, 8-inch and 12-inch sizes. The 4-inch
is most commonly used around quarter glasses where there is not much vertical
height. The 8-inch is the most commonly used size when removing windshields or
back glasses. The 12-inch is useful when reaching far below the dash on vehicles
where the windshield extends below the hood.
RUST PREVENTION
To prevent rust caused by water droplets, place a few drops of oil into the sheath
every day and allow it to run down into the blade holder.
Keep your blades sharp! This is crucial for effective cutting action and tool
longevity. A dull blade will destroy the drive mechanism in your Equalizer
®
tool.
Sharpen the blade between each removal with a diamond file. Be careful to
maintain the original sharpening angle.
Every ten removals, re-sharpen the blade on a bench grinder. Keeping a sharp
blade will help the tool cut faster, will reduce vibration, increase the life of the tool,
and reduce fatigue for the user. Most tool damage is caused because the blade
has not been kept sharp. Equalizer
®
does not warranty tools in these cases.
Before You Begin Cutting...
Spray the entire cutting area and blade
with plenty of water. Lubrication is vital for
maximum cutting ease. Failure to use water
increases cutting friction and will cause
tool damage. Periodically spray the blade
with water.
