Equalizer International Equalizer FA1TM, Инструкция оператора

Страница: 7 / 16

FLANGE ALIGNMENT TOOLS
OPERATOR INSTRUCTION MANUAL
PAGE 5
4. FLANGE MISALIGNMENT DETERMINATION
7KHWRROEHLQJXVHGPXVWQRWEHDWWDFKHGWRDÀDQJHGMRLQWSULRUWRWKHPLVDOLJQPHQW
procedure being carried out.
4.1 LATERAL MISALIGNMENT
1.
/RRVHQDQGUHPRYHHYHU\VHFRQGEROWDURXQGWKHÀDQJHFRQWLQXHZLWKWKLVXQWLOPLV
alignment occurs.
$ÀDQJHMRLQWRQFHEURNHQGRZQPD\VSULQJRXWRIDOLJQPHQWDWDQ\SRLQWRULQDQ\
direction around its circumference. Misalignment may not occur until only a few bolts
remain.
2.
$WWKLVSRLQWWKHGLUHFWLRQRIDQ\PLVDOLJQPHQWVKRXOGEHFRPHREYLRXV7KHDOLJQPHQW
tool being used should be attached at the maximum point misalignment (point A or
point B in the examples shown below) as shown in sections 5.3, 6.3 & 7.3.
POINT A
POINT B POINT A
POINT B