EPV Dark Star UST 2 eFinity Series, Руководство пользователя

Страница: 5 / 8

JA07092020
www.epvscreens.com U
-00169 5
Step 8: Carefully and gently place the assembled frame on top of the screen material in the marked areas as shown
below. Make sure to not allow the angle edge of the frame to come in direct contact with the screen material to
avoid puncturing it.
Step 9: Hook one end of the spring and secure inside the groove of the frame, use the spring hook (i) to attach the
spring to the hole located on the screen material’s outer edge in the following order.
Begin by first attaching the center points on both vertical (left/right) sides, steps 1-2 . Then the center points on both
horizontal (top/bottom) sides, steps 3-4 . Once all center points have been secured, make sure the screen material is
still within the marked areas before proceeding to attach the next springs.
Continue attaching the rest of the springs to the material in the following order in
steps 5-12 .
h.
i.
*Make sure the frame corners are positioned in
the marked areas of the material.
5
6
7
8
9
11
10 12
1
2
3
4