4
030714-JA
www.elitescreens.com
8.
Make sure all four corners are properly in place to form a perfect rectangle. Then fasten the four angles with
the
M5x15 Screws (H
).
Screen Material Installation
1. Lay the screen material completely flat with the front facing down on a clean surface in a horizontal position. The
back side of the screen material should be placed upwards.
Note: The back side of the material has the velcro borders all around the edges.
2. Carefully and gently place the assembled frame on top the screen material as shown below. Make sure to not
allow the angle edge of the frame to come in direct contact with the screen material to avoid puncturing it.
3. After all of the corners of the frame have been properly aligned, snap the material on the frame in the following
order A→B→C→D (see instructions below for details).
Four corners join correctly to form a perfect
rectangle. Use the included
screwdriver (L)
to fasten the
Mx15 screws (H)
into each
corner by aligning the frame screw holes to
the holes in the
elbow joint (A)
.
Screen material back facing up
Velcro
