EPTA iarp Cool Emotions GLEE 42 V2 LITE, Инструкция пользователя

Страница: 24 / 71

Modello - Modèle - Model
Modell - Modelo
GLEE 42 V2 LITE
GLEE 42 V2 PRIME
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
25/72
N° DOC
UM000325
13. ENERGY SAVING TIPS
• Install the appliance in a dry, well-ventilated room away from heat sources (radiator,
cooking surface and so on) and in a position out of direct sunlight.
• Follow the installation instructions to ensure adequate ventilation. Insufficient ventilation
to the back of the appliance causes an increase in energy consumption and reduces
cooling efficiency.
• The internal temperature of the appliance depends on the room temperature, how often
the doors are opened and where the appliance is placed. These factors have to be taken
into account when setting the thermostat. Only open the doors when strictly necessary.
• Let hot food and drink cool down before placing them in the appliance.
• The positioning of the shelves in the fridge has no effect on energy efficiency.
• The fridge compartment light system uses a LED light, which at the same time ensures
more efficient lighting and reduced energy consumption.
14. MAINTENANCE
WARNING! Maintenance must be carried out by technical staff trained and
enabled for intervention on the flammable refrigerants.
WARNING! Any work carried out on the appliance by the user strictly requires
the power plug being disconnected from the mains socket.
ATTENTION! Use protective shoes and gloves during maintenance operations.
OPERATION FREQUENCY
ORDINARY /
EXTRAORDINARY
MAINTENANCE
AUTHORISED
STAFF
Cleaning the outer surface
Based on use Ordinary User
Cleaning the accessible inner parts (do not use tools)
Based on use Ordinary User
Checking the power supply, electrical plugs and/or sockets
Six-monthly Ordinary User
Seals intactness check
Six-monthly Ordinary User
Check the acceptable condition of warning plates
Six-monthly Ordinary User
Water collection tank cleaning
Based on use Ordinary Technical support
Fridge system tubing intactness check
Six-monthly Ordinary Technical support
Inspecting the cables and inner power connections
Six-monthly Ordinary Technical support
Replacing the led lights
- Extraordinary Technical support
Replacing the power supply cable
- Extraordinary Technical support
Control panel replacement (electronic control unit)
- Extraordinary Technical support
Any other maintenance operation not planned in the previous points should
be carried out by the support centres authorised by our dealers or by
qualified staff.