to eliminate any conficts Windows 95 identified. Refer to the
documentation that came with your adapter for information on optional
settings.
6. Shut down the system, open the computer, and adjust the adapter's
switch or jumper settings to match the resources set in the System
Control Panel in step 5. Refer to the adapter's documentation for
detailed instructions on changing adapter settings. If you need to
reconfigure a plug and play adapter, you must see the computer's ICU
program to change the adapter settings. Check the manual that came
with your computer or contact your computer manufacturer for
information on how to resolve the conflict.
7. Restart the system and rerun Setup95.
Congratulations!
When software installation is complete, your Zip drive is ready to
use. You can use the Zip drive just like any other drive on your
system. Store and copy files to and from Zip drive in the same way as
for your other drives. For additional information on using your new
drive and Zip Tools software, refer to the EPSON Zip
Installation/User's Guide. If you want to use your Zip drive on a
Macintosh as well as on your PC, the GUEST program on the Install
diskette for Macintosh provides temporary access for the Zip drive on
any Macintosh. For full Zip benefits, call 1‚800‚922-8911 to order a
copy of Zip Tools software for Macintosh.
Zip SCSI Installation Problems
------------------------------
If you have problems installing the Zip SCSI drive, the EPSON Zip
Installation/User's Guide contains Troubleshooting and SCSI Guidelines
sections to help you install the Zip drive properly. The following
information will help you with some of the most common installation
problems.
If the computer is not recognizing the Zip drive or the EPSON Zip
Software cannot find the Zip drive:
1. Check the Zip power supply connection. Make sure the green power
light on the drive is ON.
2. Check the connection for the Zip drive data cable, and verify that
every cable connection is straight and secure. Tighten all the
connector screws completely.
3. Make sure the Zip drive is connected to the SCSI connector on the
computer.
4. Set the Zip drive to an unused SCSI ID and make sure the
termination is set properly.
If the EPSON SETUP or GUEST utility hangs the system:
1. Make sure data cable connections are straight and secure. Tighten
