Date :
1.Minute hand
2.Holding ring for dial
3.Case
4.Hour wheel
5.Magnetic shield plate
6. A.C. comment seal
Stick A.C. comment seal to the center of case back.
Sticking position
: 0.50mm and less
The amount of the misalignment between the center of case back and A.C.
comment seal
The center wheel have a safety stopper structure to prevent the minute hand from being pressed too
much. However pay attention to the contact between hour hand and minute hand.
Install magnetic shield plate on the movement(on battery clamp) before assembling the case back.
Refer to the following picture not to install magnetic shield plate incorrect direction.
Cal.
YM82A Attention of casing part structure
30/Jan./'15
Rev. : 01
When set and remove the hour hand repeatedly, it may reduce the hand fixing torque because the
hour wheel is made by plastic.
To ensure the enough fixing torque, it isn't recommended to re-assemble the hour hand more than five
times.
Use the specified holding ring for dial to prevent rotation of the movement inside of the case in order to
stabilize the button operation.
Refer to the [Holding ring for dial] page instruction as to the shape and tolerance.
Use the metal case to prevent from the movement mal-function by static electricity.
Magnetic shield plate
Movement
Case back
A.C. comment seal :
φ
10mm
・
P.10
