Epson WirelessHD transmitter, Руководство пользователя

Страница: 11 / 64

EN
11
Indicator Status
: Lit/ : Flashing/ : Off
Clean the case of the WirelessHD Transmitter by wiping it gently with a soft cloth.
If it is particularly dirty, moisten the cloth with water containing a small amount of neutral
detergent and then wring it out firmly, and then wipe the surface. Then wipe the surface
again with a dry cloth.
Do not use volatile substances such as wax, alcohol, or thinner to clean the projector's
surface. The quality of the case may change or the paint may peel off.
a
On/Standby indicator (blue)
b
WiHD indicator (blue)
c
Link indicator (blue)
d
TV indicator (blue)
On/
Standby
WiHD Link TV Indicates
Power is off.
The WirelessHD Transmitter is in standby
status. To cancel standby, press the [
t
]
button on the WirelessHD Transmitter or
the [
t
] button for WiHD Transmitter control
on the lower section of the remote control.
WirelessHD communication is available at
startup.
Startup has been completed successfully
and WirelessHD communication is
available.
Searching for a projector.
Images are being projected.
Connected to a monitor device, such as a
TV, that is connected to the HDMI Out port.
Storage and Maintenance