Epson WF-2960, Руководство пользователя

Страница: 16 / 248

Default Value of the Administrator Password
The default value of the administrator password is printed on the label on the product itself, such as the one shown.
The position where the label is attached depends on the product, such as the side where the cover is opened, the
back, or the bottom.
The following illustration is an example of the label attachment position on the side of the printer where the cover
opens.
If both labels (1) and (2) are attached, the value next to PASSWORD written on the label in (1) is the default value.
In this example, the default value is 03212791.
If only label (2) is attached, the serial number printed on the label in (2) is the default value. In this example, the
default value is X3B8153559.
Operations that Require You to Enter the Administrator Password
If you are prompted to enter the administrator password when performing the following operations, enter the
administrator password set on the printer.
❏
When updating the firmware of the printer from a computer or smart device
❏
When logging on to the advanced settings of Web Config
❏
When setting using an application, such as Fax Utility, that can change the printer's settings.
Initializing the Administrator Password
You can return the administrator password to the default settings by initializing the network settings.
Related Information
&
“Restore Default Settings” on page 228
Protecting Your Personal Information
When you give the printer to someone else or dispose of it, erase all the personal information stored in the printer's
memory by selecting
Settings > Restore Default Settings > Clear All Data and Settings on the control panel.
Important Instructions
>
Protecting Your Personal Information
16