Epson UB-U09 Скачать руководство пользователя страница 5

Страница: 5 / 24

Rev. B

UB-U09 Developer's Guide

Confidential

Meaning of Symbols

The following symbols are used in this document. Read the following carefully before handling
the product.

WARNING:

You must follow warnings carefully to avoid the following:

•

Bodily injury

•

Damage to your equipment

•

Loss of data

Note:

This symbol indicates items that are important for maintaining the product and useful information for
handling the product.

Purpose of this Document

This document is intended to provide all information necessary for system planning, design,
installation and application of the UB-U09 for designers and developers of POS systems.

Meaning of Terms

❏

In this document, “Serial communication” means the RS232 compliant serial
communication.

❏

The DIP switch function is assigned to the Memory switch in some models. So the “DIP
switch” should be read as Memory switch in corresponding models.

Related Documents

Other documents related to the UB-U09 are the following:

Table 0-1. Related Documents

Document

Contents

UB-U09 Specifications

Detailed specifications of the UB-U09

UB-U09 Operating
Manual

Intended for POS terminal operators, this manual provides
information on handling the UB-U09 safely and correctly.

Содержание UB-U09

























Результаты поиска

Содержание UB-U09

Отзывы:

Похожие инструкции для UB-U09

Бренды по названию

Популярные бренды

Epson UB-U09, Руководство разработчика

Результаты поиска

Содержание UB-U09

Отзывы:

Похожие инструкции для UB-U09

Бренды по названию

Популярные бренды