Unpacking
Make sure you have these items:
❏
UB-P02II
❏
This manual
Procedure
1
Removing the interface board from the printer
Remove the two screws that securing the interface board; then pull the board to
remove it. You will use the screws when installing the UB-P02II.
CAUTION:
Put the removed interface board into an anti-static bag for storage to
prevent damage from static electricity.
2
Installing the interface board enclosed in the package
Hold the UB-P02II as shown in the illustration below. Push the UB-P02II in gently
until you feel the connector fit into place.
3
Securing the UB-P02II
Secure the UB-P02II with the two screws.
4
Setting the printer settings
Change the printer settings to match the printer to the new interface.
See the parallel interface settings described in the printer documentation for the
settings.
Make sure you set the printer settings. Otherwise the printer may not work correctly.
Printed on Recycled Paper
Connector of
the UB-P02II
Connector of
the TM printer
